Have you been enjoying the lovely warm glow of your himalayan salt lamp, lately it mysteriously started leaking water?
You’ve purchased a brand-new Himalayan salt lamp and you’re excited to use it… but it’s starting to leak water.
Don’t worry – This is a completely normal occurrence and does not indicate that there is something wrong with your Himalayan salt lamp.
This is a complete guide to salt lamp leaking water!
Himalayan salt lamps have an interesting characteristic where they leak when turned off for extended periods of time because they are heated by light, and without heat, the moisture inside them will escape as a liquid.
Salt Lamp crying, also called “leaking,” “weeping,” “sweating,” or “melting,” is quite normal.
Despite the fact it’s called leaking the water is not actually coming from the himalayan salt lamp itself.
Why Do Himalayan Salt Lamps Leaks?
It occurs due to the natural properties of himalayan salt lamps.
Himalayan salt is hygroscopic in nature which means it attracts moisture from the environment.
Along with the moisture, all the impurities also get trapped inside the lamp.
It is the moisture absorbed from the environment that causes the salt lamp leaking water. Nothing to worry about.
If a lamp is left too long without being cared for, moisture can build up inside the container.
The salt lamps will leak to remove this unwanted liquid and in turn release impurities from its porous clay shell that would otherwise remain trapped within.
As a result, if you leave a salt lamp anywhere, particularly in the open or in humid environments, water from the air will naturally begin to condense on the surface.
If your salt lamp is wet to the touch on the surface or around the base, the moisture is not coming from the pink salt lamp, but rather from the air around it.
Now, with that in mind, let’s find out how to stop excessive leaking.
And there’s a solution:
How To Stop Salt Lamp Leaking Water?
You can follow the following steps to avoid salt lamps leaking and damaging.
If you live in a place where the environment is mostly humid, you will have to bear with crying salt lamps.
Maintaining your salt lamp is easy, all you need to do is make sure it stays dry.
STEP#1: Places To Avoid Placing Salt Lamp
The first step is to avoid places where there is typically high humidity from water vapor seeping through walls. Using salt lamps in areas that are known for high levels of moisture because will absorb it and cause the lamp to leak.
These places are as follows:
- Open and outdoor spaces
- Next to the open window
If you can avoid placing a lamp in the above environments, it will surely save your lamp from leaking,
You’re already halfway there to preventing leaking.
STEP #2: Keep Salt Lamp On All The Time
The next best thing to do is keep your lamp on as much of the day as possible.
Keeping your lamps turned on 24/7 is ideal or at least 16 hours a day should help prevent any water that collects on the surface will evaporate immediately.
STEP #3: Buy A Higher Wattage Bulb
The 7-Watt bulb is the standard for most lamps, but a 15-watt bulb is powerful enough to evaporate moisture from its surface.
Especially, If you live in a humid area though, and want to get rid of the leaking water quickly then go with 25W or 30W bulb instead.
They will evaporate the water on their surface faster than a 7W standard bulb, but they also produce negative ions because of this fast evaporation process!
If you are not sure which one works best with your himalayan salt lamp, I really recommend you to read this guide to find out the best bulbs according to your salt lamp.
STEP #4: Use a Moisture Absorber
You can also use a moisture absorber in the same room as your salt lamp. This will reduce the overall moisture in the air and prevent your lamp from leaking.
A great way to keep our salt lamps safe, happy, and healthy for years of enjoyment by placing a moisture absorber alongside your salt lamps to remove overall excess humidity from the area and keep the himalayan salt lamp dryer.
Damprid is a good option for most situations.
STEP #5: Store Salt Lamp When Not Using
To protect your lamp, the best way to store a lamp is by using either glad wrap or bubble wrap before storing it away for a long period of time.
This will prevent any moisture from getting on the bulb and causing damage when you turn your himalayan salt lamp back on again.
In addition to this, you need to follow the following 4 steps in order to avoid any dangers pertaining to the salt lamp leaking.
- Simply turn off your lamp, unplug the cord and dry it. Follow our himalayan salt lamp care guide to find out how to keep your lamps dry?
- The water that comes off the salt lamp is not ordinary water, but refer to as “saltwater.” When heated, this releases behind salt crystals, therefore, it’s important to wipe this water clean from furniture or other surfaces properly.
- Make sure to wipe your salt lamp base and scrape the salt crystals off of it, if necessary. To reduce the risk of scratching your wooden base, use hard plastic tools like plastic disposable cutlery, instead of metal utensils when scraping salt off with a scraper.
- A simple solution for when your lamp is weeping or leaking is to place a large plate or tray under the base of your lamp to catch any dripping water during temporary humid conditions.
Find the best Himalayan salt lamp for you in the most comprehensive guide, complete with a variety of shapes, styles, budgets covered!
The Dangers of A Leaking Salt Lamp
Too much excessive leaking is dangerous, so it’s important to fix the problem right away.
Here are a few potential dangerous hazards that a weeping salt lamp can cause.
- One side can be heavier than the other: This might not sound dangerous, but when you think about how heavy your lamp is (up to 80 pounds!), it will make more sense. Your lamp’s weight is evenly distributed on all sides, and if you let it leak over a long period of time, one side will erode faster than the other. When this happens, your lamp becomes easier to tip over and that will cause a broken toe if it lands on your foot. Ouch!
- Avoid Corrosion: Avoid placing your salt lamp on metal surfaces. This move will be costly and dangerous for your salt lamp. If you must keep it on a surface, place a mat or tray underneath it.
- Electrical Potential Fire Hazard: You may only be concerned about the beauty of the Himalayan salt lamp, but don’t forget that it’s still an electronic lamp. There’s a cord coming out from the back and if water leaks into a nearby outlet, you can have trouble on your hands. If water gets into the electrical outlet and it is near a salt lamp, then it can create an electrical hazard. If salt melts on the cord, there is a danger of fire.
Just remember, leaking water is a normal symptom of himalayan salt lamps.
We hope these steps and tips help you to make your salt lamp leaking water
Follow our tips for storing your salt lamps correctly, taking care of them properly, as well as how avoid placing them in certain places where they could accidentally leak when not being used.
Which step from today’s guide are you going to try first?
Are you going to start using the salt lamps 24/7?
Or maybe you will replace a higher wattage bulb?
Either way, let me know by leaving a comment below right now.
Hope to see you next time!